Team Activities Log

FabLab Team sixth meeting : electronic simulation 30/10/2019

• design requirement
  • using any simulation software to test one of these circuits 555 ic circuit transistor as a switch circuit 7 segment circuit (with decoder or without) h bridge circuit OR ANY CIRCUIT YOU WANT TO TEST, AT LEST HAVE THREE COMPONENTS simulation software : proteus, multisim, … your are not restricted to these two
• Boys
  • ahmed
  • 
  • seif
  • 
  • abdalrahman
  • 
  • abdallah
  • 
  • 
  • anas
  • zidan
  • 
• Girls
  • nihal
  • 
  • nada
  • 
  • nourhan
  • 

FabLab Team fifth meeting : 3D design 23/10/2019

• design requirement
  • 5x5x5 cm or a 125 cm square design on 3D design software
• Boys
  • abd alrahman
  • 
  • 
  • ahmed
  • anas
  • 
  • 
  • 
  • seif
  • 
  • zidan
  • 
  • 
  • 
  • 
  • 
• Girls
  • arwa
  • aya wahba
  • mayar
  • nada
  • 
  • nihal
  • 
  • 
  • veronica
  • sarah

FabLab Team fourth meeting : inkscape software and vinyl cutter machine 15/10/2019

• design requirement
  • 7*7 cm design on inkscape software that includes
    • photo
    • text
• Boys
  • abd allah
  • abd alrahman
  • ahmed
  • 
  • anas
  • 
  • hesham
  • 
  • zidan
  • 
  • 
• Girls
  • arwa
  • aya wahba
  • 
  • nada
  • 
  • 
  • nihal
  • nourhan
  • 
  • 
  • sarah

FabLab Team third meeting : continue eagle PCB design software 9/10/2019

• design requirement
  • using 3.5 * 5 cm board and any electronic circuit they would like to choose
  • use the components from the FabLab
• Boys
  • ahmed
  • 
  • seif
  • 
  • zidan
  • 
• Girls
  • arwa
  • 
  • 
  • aya
  • 
  • 
  • mayar
  • nada
  • 
  • nourhan
  • 
  • nihal
  • 
  • sarah
  • 
  • veronica
  • 
  • 

FabLab Team second meeting : eagle PCB design software 2/10/2019

• design requirement
  • using 3.5 * 5 cm board and any electronic circuit they would like to choose
  • use the components from the FabLab
• Boys
  • abdallah
  • abdalrahman
  • ahmed
  • 
  • anas
  • seif
  • 
  • zidan
• Girls
  • arwa
  • aya
  • mayar
  • nada
  • nourhan
  • 
  • nihal
  • sarah
  • veronica

FabLab Team first meeting : corel draw and laser cutter 25/9/2019

• design requirement
  • using 10 * 10 cm wood piece and what ever design they would like to choose
• Boys
  • abdallah
  • 
  • 
  • abdalrahman
  • 
  • 
  • ahmed
  • 
  • 
  • seif
  • 
  • zidan
  • 
  • 
• Girls
  • arwa
  • 
  • mayar
  • 
  • 
  • nada
  • 
  • 
  • nihal
  • 
  • 
  • sarah
  • 
  • 
  • veronica
  • 
  • 

Zidan - 4/9/2019

• making key chain for the fablab keys
• 

  • first design

    1. I made a rectangle with diminutions 3cm x 5cm that contains A letter.
    2. I made 2 circles with diameter 5mm.
    3. I changed the setting of the lines of the triangle and circles to hair line to allow the laser cutter to cut them.
    4. I repeat these steps 7 times, with changing the latter from A to B, C, E, F, G, H and S.
    • 

  • second design

    1. I made rectangle with dimentions 30cm*5cm that contains 7 letters and under each letter a circle with diameter 5mm.
    2. I chanced the setting of the lines of the triangle to hair line.
    • 
    • 

  • Finally

    • I made the power of milling 100 and the speed 15 and the power of the cutting 100 and the speed 45.
    • 
    • 
    • 
    • 
    • 
    • 

Zidan - 3/9/2019

- using freecad to design a pyramid and print it on 3d printer - I made the layers that was: 1. first layer was 5cm width, 5cm length and 1cm height. - - 2. second layer was 4cm length, 4cm width and 1 cm height. - 3. third layer was 3cm length, 3cm width and 1cm height. - 4. Fourth layer was 2cm length, 2cm width and 1cm height. - - 5. Last layer was cubic 1*1*1. - - Then I grouped them into one shape. - After that I saved the project as stl. - Then used cura application to convert it to gcode and saved it in SD card - Finally, I put the card in the 3D printer to start print. It takes 1.15 hour to protect this shape. - pyramid file

Nourhan - 2/9/2019

- installing windows OS on machine’s computers - installing ubuntu OS on machine’s computers - organizing fablab according to the new layout